How to Use a Bike Rack: A Beginner’s Guide to Every Car Rack Type
JupiterVehicles is reader-supported. As an Amazon Associate, we earn from qualifying purchases.
Using a bike rack comes down to three things: attaching the rack to your vehicle, securing the bikes to the rack, and checking everything before and during the drive. The details depend on the type of rack you have.
Table of Contents
The Main Types of Car Bike Racks
REI’s car rack guide describes the main types:
| Rack type | How it attaches | Notes |
|---|---|---|
| Hitch rack | Slides into a trailer hitch receiver | Easy loading, can carry e-bikes |
| Trunk rack | Straps and hooks on a trunk or hatch | Cheap and light, carries 1 to 3 bikes, blocks trunk access |
| Roof rack | Clamps onto roof crossbars | Keeps the rear clear, bikes are high up |
| Spare-tire rack | Mounts on an exterior spare tire | Light and affordable |
| Truck bed rack | Rails or bars in the truck bed | For pickups |
How to Use a Hitch Rack
- Slide the rack into the hitch receiver and line up the pin hole.
- Insert the hitch pin or threaded bolt and tighten it fully.
- Unfold the trays or arms.
- Load the heaviest bike first, closest to the vehicle.
- Secure the wheels with straps and the frame or wheel with the clamp arm.
- Versatile design fits nearly all styles of bikes up to 60 lbs each with zero frame contact
- Integrated wheels help to maneuver the rack when it's off the vehicle
- The HitchSwitch lever allows you to tilt the rack down for rear vehicle access or tilt it up when not in use
- Fits 20 - 29" wheels and up to 5" tires without adapters, making it ideal for carbon frames, mountain, downhill, or fat bikes
- Integrated cable locks secure bikes to the rack and locking knob locks the rack to the hitch receiver
See our best hitch bike rack guide for options.
How to Use a Trunk Rack
- Position the rack’s padded feet on the trunk or hatch, following the fit guide for your car.
- Hook the straps onto the trunk edges.
- Tighten the straps evenly until the rack doesn’t move.
- Hang the bikes on the support arms, heaviest first.
- Strap each bike down and use anti-sway straps if included.
REI notes that bikes on trunk racks may sway or bump into each other, so pad contact points and tighten the straps well.
How to Use a Roof Rack
- Make sure your crossbars and rack are installed correctly.
- Lift the bike onto the tray. Fork-mount racks need the front wheel removed.
- Clamp the frame, fork or wheel, depending on the rack.
- Strap the wheels into the tray.
Remember the bikes are on the roof before you pull into a garage or drive-through.
Safety Checks Before You Drive
- Shake each bike and the rack. Nothing should move much.
- Make sure no straps or wheels are dragging or touching the exhaust.
- Check that your license plate and lights are visible. Rules vary by state.
- Stay within the rack’s weight limit and your vehicle’s limits.
Checks During the Drive
Thule says some vertical movement is normal in hitch racks, but recommends checking the rack’s tension every 200 miles in its hitch rack wobble guide. It’s smart to recheck all racks and straps at every stop.
FAQ
Which bike rack is easiest to use?
Platform hitch racks are usually the easiest because you roll or lift the bike only a short height and clamp the wheels.
Can I open my trunk with a bike rack on?
Not with most trunk racks. Many hitch racks tilt down so you can open the rear hatch.
Do I need to remove my bike rack after each trip?
Not always, but removing it reduces theft risk and wear, especially for trunk racks that rest on your paint.

One Comment