How to Attach a Bike Rack to a Car (Even Without a Hitch)
JupiterVehicles is reader-supported. As an Amazon Associate, we earn from qualifying purchases.
There are three ways to attach a bike rack to a car: with straps on the trunk or hatch, with clamps on roof crossbars, or into a trailer hitch. Most sedans and hatchbacks have neither a hitch nor crossbars, so a trunk rack is usually the starting point. SUV owners have a few extra options, covered in how to attach a bike rack to an SUV.
Table of Contents
Method 1: Trunk Straps (No Hitch Needed)
How it attaches: Padded feet rest on the trunk lid or hatch and bumper. Straps with coated hooks clip onto the gaps around the trunk, usually top, sides and bottom. Tightening the straps pulls the rack firmly against the car.
Good for: Sedans and hatchbacks with no hitch or crossbars.
Watch out for: Spoilers, plastic trunk lids and some glass hatches. Many trunk racks aren’t approved for them, so always check the maker’s fit guide.
- Patented Design Fits Sedans, Hatchbacks, Minivans, And Suv'S Consult Manufacturer Web Site For Specific Vehicle Fit Information.Comes fully assembled set up and installs in seconds 12 inch long carry arms easily accommodate a wide range of bicycle styles and 115 inch wide carry arms for greater bike compatibilityShips in certified frustration free packaging 70 pounds max capacityFolds fully flat for easy storage.Allen's warranty does not cover items purchased through third-party sellersImportant, please consult manufacturer web page for specific vehicle fit.Target gender : unisex.
- Side Straps For Increased Lateral Stability. Single Configuration Design Eliminates Setup Hassles And Headaches During Installation
- Individual Tie Downs Secure And Protect Bicycles
- Padded Lower Frame Keeps Bicycles Away From Vehicle
Method 2: Roof Crossbars
How it attaches: Bike trays clamp onto crossbars, which attach to the roof with towers (feet) and a vehicle-specific fit kit.
REI’s car rack guide explains that a base roof rack has three parts: crossbars, towers that fit your roof type (bare roof, flush rails, fixed points or raised rails), and clips or fit kits for your specific vehicle. REI recommends using the Thule or Yakima fit guides to find parts for your car.
Good for: Cars where you want the trunk free, or riders with several sports to carry.
Method 3: Trailer Hitch
How it attaches: The rack slides into a hitch receiver and is held by a pin or bolt.
Good for: Frequent riders, heavier bikes and easy loading. Most cars use a 1-1/4 inch Class 1 or 2 receiver. CURT’s hitch class guide lists Class 1 hitches with tongue weight ratings of up to 200 lb, so pick a rack that suits the smaller receiver.
Which Method Should You Choose?
| Method | Upfront cost | Ease of loading | Trunk access |
|---|---|---|---|
| Trunk straps | Lowest | Easy | Blocked while loaded |
| Roof crossbars | Highest if you need crossbars | Harder (lifting overhead) | Free |
| Hitch | Medium to high, plus hitch install | Easiest | Often tilts away |
Tips for Any Rack
- Follow the rack maker’s fit guide and instructions for your exact car.
- Check that your license plate and lights stay visible.
- Recheck straps, clamps and bolts after the first few miles.
For product picks, see the best bike rack for car guide.
FAQ
How do you attach a bike rack to a car without a hitch?
Use a trunk-mounted rack with straps, or install roof crossbars and a roof bike rack.
Can you put a bike rack on any car?
Most cars can take at least one type. Some trunk racks don’t fit cars with spoilers, so check the fit guide.
Is it hard to attach a bike rack to a car?
No. Trunk and hitch racks usually take 10 to 15 minutes once you know the steps.
