Bicycle mounted on a car roof
|

How to Put a Bike on a Roof Rack: Upright and Fork-Mount Carriers

JupiterVehicles is reader-supported. As an Amazon Associate, we earn from qualifying purchases.

Putting a bike on a roof rack takes a little more effort than a hitch or trunk rack, because you’re lifting it overhead. With the right technique, it’s quick and safe. The steps depend on whether your carrier is an upright (wheel-on) style or a fork-mount style.

If you haven’t installed the carrier yet, start with how to install a bike carrier on a car.

Before You Lift

  • Check your roof and crossbar weight limits. Thule’s roof rack capacity article explains how they work.
  • Remove bottles, bags and anything loose.
  • Open the carrier’s clamps and wheel straps.
  • On taller cars, use a sturdy step or open a rear door and stand on the door sill only if your car is designed for it.

How to Lift the Bike Safely

  1. Stand beside the car, next to the carrier.
  2. Hold the bike with one hand on the stem or handlebar and the other on the seat post or saddle.
  3. Lift in one smooth motion, keeping the bike upright and close to your body.
  4. Rest the rear wheel in the tray first, then lower the front wheel in.

Upright (Wheel-On) Carriers

  1. Set both wheels in the tray and center the bike.
  2. Secure the bike. On frame-clamp carriers like the Thule ProRide XT, swing the arm to the down tube and tighten. On wheel-hold carriers like the Thule UpRide, the arm presses against the front wheel instead, so the frame isn’t touched.
  3. Strap both wheels into the tray.
  4. Lock the bike to the carrier if it has a lock.
Sale
Thule ProRide XT Roof Bike Rack | ProRide XT Roof Bike Rack - Universal Fit, Lightweight, Secure #
  • Universal upright bike rack for 1 bike
  • Quick and secure mounting dial controls the force going into the bike frame
  • Soft claw pads adapt to your bike's frame minimizing risk of damage
  • Frame holder and wheel tray automatically position your bike as you secure it
  • Wheel holders firmly stabilized by diagonal quick release straps

The ProRide XT uses a dial to control the clamping force and soft pads to protect the frame.

Fork-Mount Carriers

  1. Remove the front wheel. Open the quick release or thru-axle.
  2. Lift the bike onto the tray and lower the fork dropouts onto the fork mount.
  3. Close the skewer or axle on the fork mount and tighten it.
  4. Strap the rear wheel into the tray.
  5. Store the front wheel inside the car or in a separate wheel holder.

Check your fork’s axle type. Many modern bikes use thru-axles, which need a matching adapter.

Sale
Swagman Standard Fork Mount Roof Bike Rack – Rooftop Bike Carrier for 9mm Quick Release Bikes
  • EASY TO ASSEMBLE: The STANDARD is easy to assemble with no tools required, sets up in just minutes following the instructions. Once assembled, simply load your bike and you are ready to go!
  • CONVENIENT: The upright roof top carrier, easily transports 1 bike while attaching to your roof rack. Fits square, round and oval bars up to 3" wide
  • WORRY FREE SECURITY: Bikes are secured on the fork mount blocks. These blocks include 9mm Quick Release skewers that anchor your bikes to the rack.
  • VERSATILE: The solid & versatile design fits most vehicles types & sizes

Before You Drive

  • Shake the bike. It should move with the car, not on its own.
  • Check that clamps and straps are tight.
  • Fold or turn mirrors on the bike, and remove anything that could blow off.
  • Remember the bike is on the roof. Avoid low garages, parking structures and drive-throughs.

FAQ

Is it hard to put a bike on a roof rack?

It takes more lifting than other racks, especially on tall vehicles. Lighter bikes and a step stool make it easier.

Do I need to remove the front wheel for a roof rack?

Only for fork-mount carriers. Upright carriers hold the whole bike.

Can I put an e-bike on a roof rack?

Most e-bikes are too heavy for roof carriers and for lifting overhead. A platform hitch rack is a better choice.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *